Miray Forum

There is some way to load windows drivers for RAID controllers. You don't see an HP p400,

Thank you

There are the following possibilities:

a) run HDClone directly under Windows, where the drivers are available (if possible)

b) create a self-booting Windows PE, add the RAID drivers there, and copy the hdclone.exe file on the Windows PE disk/drive. This way, you can self-boot a Windows PE anywhere, use the RAID drivers, and run the Windows version of HDClone

c) run HDClone in Linux mode, by pressing the 'L' key in the bootloader (HDClone Pro and Enterprise only). The current versions of the Linux that ships with HDClone already includes the "hpsa" driver which is necessary for talking to the hp p400. Some manual configuration of the RAID array *may* still be necessary.